TP E-HF Series

Solvent Based Pad Printing Ink Range, 1- and (alternatively) 2-Component


Pad printing ink range TP E-HF is suitable for printing on various thermoplastics, especially ABS, SAN, ASA, polystyrene (PS), rigid PVC, PMMA (“acrylic glass”) and polycarbonate (PC).
In addition, as a 2-component system and/or after pre-treatment of substrates (flame, corona) TP E-HF inks can also be printed on polyester, polyamide (PA) and some coated surfaces.


• Pad inks TP E-HF are solvent based pad printing inks. They can be processed as 1-component and (alternatively) as 2-component ink with hardener
• In line with current safety requirements pad printing inks TP E-HF have been formulated with especially environmentally compatible raw materials.
The inks are free of halogens according to DIN EN 61249-2-21*.
In addition, TP E-HF inks do not contain aromatics, butyl glycolate (GB-Ester), cyclohexanone, Bisphenol A (BPA) and also no polycyclic aromatic hydrocarbons (PAH).
Exception: Black colours N50-HF, 65-HF and 65-HD-HF (PAH- containing pigments).
• If the criteria to obtain the GS mark according to GS specification AfPS GS 2014:01 PAH have to be met, the following applies:
Colour shade black:
Only colour shades N58-HF, 68-HF or 68-HD-HF are suitable.
Only those products marked with symbol  in this data sheet are suitable.
• Processed as 1-component ink TP E-HF dries physically, as 2-component ink physically chemically-reactive
• TP E-HF inks are quick drying and result in a glossy finish. This ink range can be used on flat pad printing and rotation printing equipment.
• TP E-HF prints show a good abrasion resistance and good resistance against alcohol and benzines. These resistance properties can be improved by processing TP E-HF as a 2-component system.
• Processed as 2-component system TP E-HF inks will also show adhesion or increased adhesion on difficult substrates.
• Ink range TP E-HF is suitable for outdoor applications.
• Note: Because of the variety of substrates, pre-tests are essential. It is also advised to check efficiency of possibly required pre-treatment of substrates (cleaning/degreasing, flame/corona/plasma treatment) or maybe even post-treatment (flame-drying).


>> Product Data Sheet TP E-HF Series

Color Shades

>> Color Card TP E-HF

Y 30 Y 56 O 56 R 26 R 50 M 50 V 56
B 50 G 56 N 50 W 50 E 50 blindpixel W50  W50




>> Color Card Standard HD P

60-HD white 68-HD black          


You will find further color shades of ink series TP E-HF in the product data sheet.


>> Product Data Sheet TP E-HF Series


* The strength and tint of all colors depicted on this website may deviate from the original due to technical reasons. For an exact color display please ask for our original color cards.